Only available for Nobeltec TimeZero Trident and Catch.

Nobeltec TimeZero navigation software can be connected to a Furuno NavNet3D or TZtouch network allowing full control of the DRS radars (with an MFD present on the network).

When Nobeltec TimeZero is connected to a NavNet3D network, the following capabilities are enabled:

    - Receive all the navigation information (Position, COG/SOG, Heading, Wind, AIS, etc.) from the NavNet3D Network

    - Real-Time synchronization of the Active Route among the PC and every NavNet3D MFD display on a network

    - Exchange Routes and Waypoints from the PC to NavNet3D MFD(s) over the network

    - Enable the Chart Server for NavNet3D MFD(s)

    - View and control the DRS Radar (*)

When Nobeltec TimeZero is connected to a NavNet TZtouch network, the following capabilities are enabled:

    - Receive all the navigation information (Position, COG/SOG, Heading, Wind, AIS, etc.) from the NavNet TZtouch Network

    - Real-Time synchronization of the Active Route among the PC and every TZtouch MFD display on the network

    - View and control the DRS Radar (*)

(*) MFD must be present on the network
                        

The Plus Pack also enables connection to a Furuno FAR2XX7 series radar when this optional Furuno Radar Plus Pack is unlocked. These commercial grade radars have an Ethernet connection that makes the connection to Nobeltec TimeZero possible, and enables the following capabilities:

    - View and control the Furuno 2XX7 Radar from your PC

    - Acquire and display ARPA targets

    - Receive Position, COG/SOG, Heading data from the FAR2XX7 Network